Get A Free Quote

Product Categories

Injection Molding Machine

Film Blowing Machine

Low Temperature Granulator

screw&barrel

contact us

https://xige2.hyhdemo.top/wp-content/uploads/2026/02/PVC-4.webp

https://xige2.hyhdemo.top/wp-content/uploads/2026/02/PVC-1.webp

https://xige2.hyhdemo.top/wp-content/uploads/2026/02/PVC-2.webp

https://xige2.hyhdemo.top/wp-content/uploads/2026/02/PVC-3.webp

IJT PVC series servo injection molding machine

Stable Pressure Control Long-Term Operation Servo-Controlled Precision

·When PC (polycarbonate), PVC and other plastic material used engineering are planned formolding,it is necessary to inform
us forspecial designation.
·There is more detailed documentation for your availability in addition to above specification.
·The machine pictures are for vour visual reference and may have trivial differences from theactual machines.

Get a Free Quote

Product Parameters

Category	Parameter	Unit	IJT-SV118 PVC
Injection Unit	Screw Diameter	mm	36 / 40
	Screw L/D Ratio	L/D	21.2 / 19
	Shot Volume	cm³	188 / 232
	Injection Weight (PVC)	g	220 / 271
	Injection Pressure	MPa	160 / 129
	Injection Rate	cm³/s	94.5 / 116.7
	Injection Speed	mm/s	93
	Plasticizing Capacity	g/s	15.6 / 21.5
	Screw Speed	rpm	0 ~ 190
Clamping Unit	Clamp Tonnage	KN	1180
	Toggle Stroke	mm	330
	Space Between Tie-Bars	mm	375 × 375
	Max. Mold Height	mm	430
	Min. Mold Height	mm	150
	Ejector Stroke	mm	100
	Ejector Tonnage	KN	33
	Ejector Number	Piece	5
Others	Max. Pump Pressure	MPa	14
	Motor Power	kW	8.9
	Heater Power	kW	7.35
	Machine Dimension	m	4.38 × 1.5 × 1.8
	Machine Weight	ton	3.5
	Oil Tank Capacity	L	200